Articles in "Vatech 3D Viewers" Category

Vatech doest not support the use of site to site VPN or other means for remote connections; as we have no way to trouble shoot such connections. Any setup of this nature would be considered 'use at own risk'.However technically possible; all sites would need to exist networked togeather so that all stations can access each other as if they ...

As of 2010, EzImplant was discontinued by Ewoo, and no further Implant updates are available.

Open the CT as normal, to Burn the working file on CD/DVD or save on the local disk.1. Click [MAIN MENU] and then the [Export] menu.The [Export] window appears as follows. Click to select the location of the exported file inthe Save Type section.Click to select one of the File Compression options as follows.When the process is complete, the [DISK B...

With the Ez3D-i open; adjust the VR Coloring Adjustment to the preferred viewing mode.With the adjusting VR coloring function, users can set up the default value in various modes. • To Default the Setting Click the [Default Setting] button and the following window appears.Click the [OK] button to change Preset VR Coloring values for the 3...

With Ez3D-i open; Click on the "Menu" button in the upper left hand corner of program, and click "Settings" Now you will want to click on the "Clinic Info" tab. Once on the tab; you can then enter all your information, when done click OK.Clinic InformationYou can input the clinic information such as the name of th...

Open Ez3D-i and click the Main menu in the upper left hand corner and choose settings in the drop down menu as shown below.Choose the Linkage/Email tab.E-Mail Sender InformationUsers can send a test email from the saved user account. To do this, the email address,name, password and other related information are required.To use the Email feature pro...

Project File does not save from Ez3D-i or there might be an error message it can not save. Typically after fresh installation or when configurations are changed you will need to configure Ez3D-i to save projects to the Server.The first thing you will need to know is where the Database "DB SERVER" and VTFileManager are located. This is typ...

As of 2010, EzImplant was discontinued by Ewoo before the end of XP Support and considered ONLY officially supported on Windows XP. For Windows 7, however it has been known to run on Windows 7 along with the Hasp Driver, however no support is available for unsupported OS. Note: Only CD Burning might be affected...