Articles in "General Q&A" Category

Datagrabber & SDK integration Compatibility for Vatech Software - The following chart to be used to identify Dattagrabber Functionality for Practice Management Software Bridging to EzDent-i / Easydent4 Direct SDK from Practice Management to EzDent-i/Easydent4 Twain for 2D & IntraOral HD Sensors.Note: Not all programs capable of twaining are...

UL listing is only but 1 of the many Nationally Recognized Testing Laboratory - registered Program. Any of the NRTL listed and approved programs can be used equally for anyThe NRTL - Recognizes private sector organizations to perform certification for certain products to ensure that they meet the requirements of both the construction and general in...

Practice Management bridging to EzDenti- linkage.xml message when bridging information from 3rd party is typically caused by lack of certain key patient information.First you will want to try a known good patient that has been previously passed and verify operation of the bridge it self, if it still failes then check that you can manually open EzDe...

In the event that migration from one PC to another PC (Or server) in case of changing PC's, due to upgrade or replacment -or- in preperation of migration from Easydent4 to EzDenti it is first important that a final backup is conducted right before the upgrade or migration occurs to ensure a good working backup copy before anything is moved or c...

Vatech is not able to assist wtih IT related issues due to liability and certain rules outlined by HHS in HIPAA Guidelines. A certified IT person is required to support all your IT needs including the Capture PC under HIPAA rules.These topics might be but not limited to: On-Demand Software installation including Vatech Software on workstations and ...

Datagrabber support is provided and managed by it's respected manufacture support - Apteryx Inc. for all datagrabber related topics. Vatech does not offer any support for the 3rd party software by our support team in order to focus on our primary market manufactured products and software. Please direct all questions or support/update requests t...

Can I use a "UPS" Battery backup to protect my X-ray device?No - Vatech does not recommend using a "UPS" or known as Battery backup on your X-ray machine. These devices are run off battery and typically can not keep up with the power demand; typically when used will cause a long tone or beeping sound during capturing which indic...

What should I use to protect my X-ray device from electrical surges?Amperage Protection: First we recomend having a PowerVar* unit which will assist with protection from over Amperage.Most NEW devices sold after 2014 will come wtih the appropriate device. However if your machine did not come wtih a PowerVar unit We recommend that you contact your d...

Please review the following guide on what you should do in case of emergency such as Natural Disasters - Hurricane; Flooding; Tornados, EarthQuakes, lighting strikes. Electrical surgers or other man made disasters.Here are some saftey reocmmendations we urge our users to follow. 1. Before the event- It important to ensure the saftey of all, and use...

Please note the following procedure applies to All Pax-i, Paxi3D, Paxi3D Green , Smart3D  units and some other  P1 Equipped units that use "NCSW" (New Capture Soft Ware) as show below in the screen shots.The procedure for re-saving for all modalities; Pano, Ceph, CT are all basically the same except the mode we pick, also if you...